|
Motor Driving Hot Stamping Date Coder
For Vertical Form-Fill-Seal Wrap Packaging Machine
| Model No.: PM-2 |
|
|
|
PM-2 is a intermittent hot foil coding device. It can
be installed for overprinting text, onto film such as cellophane, polypropylene, aluminum, polyester or cardboard, at speed up to
90 prints per minute, on a 20x35mm printing area. It can be easily installed
VFFS packaging machines. With a special idle bar, continuous motion is also
installable.
|
|
FEATURES:
Driven
by AC motor, no air consumption needed.
1 to 3 lines print, easy to adjust.
Easy to change types.
Easy
to change any printing direction.
Stable temperature control system.
Clear print quality.
End
of ribbon sensor.
Low dispensable material cost.
SPECIFICATIONS:
Power required: 100/110VAC or 200V~240V 50/60Hz,single phase, 200W.
Dispensable material: Hot Foil / Ribbon.
Printing area: 20mmX35mm
Printing Speed: 90 prints/min
Ribbon length: 100~153M.
Character size: 3mm.
Signal required: connect signal, photoelectric sensor or limit switch.
Coder dimension: 225(H)x226(W)x170(L)mm.
Net Weight: 10~12 Kg, depends on frame size.
|
The above specification are subject
to change without prior notice.
MaCoder
Enterprise
Co., Ltd.
42 Li-Pa St., Pate City, Taoyuan 334, Taiwan
Tel: +886-3-3755721
Fax: +886-3-3678246
E-mail: sales@macoder.com
or macoder.com@msa.hinet.net
|
